These can be used to provide a horizontal feature between changes in elevational treatments, floor levels or changes in walling thicknesses.
Our Plinth Course is produced in one thickness of 140mm and in two heights, 215mm and 290mm.
They both have a 40x40mm smooth finish chamfer on the top front corner. Left and right hand 90 degree external and internal masons mitres are also produced for forming corners. Other angles can be produced upon request.
The plinth course finish is normally smooth sandstone, however a tooled finish on the vertical front face can be produced if required.
| Ref: | Height (mm) | Length (mm) |
|---|---|---|
| SPP1 | 215 | 890 |
| SPP2 | 215 | 440 |
| SPP3 | 290 | 890 |
| SPP4 | 290 | 440 |
| Ref: | Height (mm) | Length (mm) |
|---|---|---|
| SSP1 | 215 | 890 |
| SSP2 | 215 | 440 |
| SSP3 | 290 | 890 |
| SSP4 | 290 | 440 |
| Ref: | Height (mm) | Length (mm) |
|---|---|---|
| SBP1 | 215 | 890 |
| SBP2 | 215 | 440 |
| SBP3 | 290 | 890 |
| SBP4 | 290 | 440 |
Our Band Course is produced in one standard section of 130mm x 140mm high and in 2 lengths of 890mm and 440mm. They have a standard 30x30mm smooth finish chamfer on the top and bottom front corners.
They are available with either an external or internal 90 degree masons mitre.
They can be used in either left or right corner situations. Other angles can be produced upon request.
| Ref: | Length (mm) |
|---|---|
| SBC1 | 890 |
| SBC2 | 440 |
